3D Printed Ratcheting Socket Wrench3D Printing

3D Printed Ratcheting Socket Wrench – Version 2

A second version of my 3D printed ratcheting socket wrench – the design is still fully 3D printed, with eight M4 machine screws fastening it together. Once again, the ratchet mechanism has attachments on each side, which was inspired by Cleven’s design to allow the ratchet to drive both clockwise and counter-clockwise.

The new ratcheting mechanism has been strengthened with 4 teeth replacing the original 2 and the internal springs have been modified to accommodate this change. The handle has also been bulked up to ensure that it will not snap whilst turning high torque loads.